Variations

The system has two variants:

BEAM OVER BEAM

The EXTEND beam is placed under the affected beam, achieving the transmission of loads to the reinforcement beam by caulking space between both with controlled retraction mortar.

extend-beam-over-beam-reinforce

Beam over beam

BEAM BETWEEN TWO BEAMS

The damaged beam is placed under a U-shaped tray transmitting loads to two EXTEND reinforcing beams, located on both sides of the beam through  transversal profiles or sleepers resting on both  and placed at a metre interval. Load transmission is achieved with the caulking of controlled retraction mortar.

extend-variantes-viga-entre-dos-vigas

Beam between two beams

The  adjustment and hanging of the transversal profiles on the EXTEND beam is performed by using some omega shaped clamps fitted together with threaded rods, which in turn serve for adjusting the height of the sleepers.

Facebook0Twitter0Google+0LinkedIn0Email